Connecting The Usb 3.0 Cable - Dell UltraSharp U4919DW User Manual

Hide thumbs Also See for UltraSharp U4919DW:
Table of Contents

Advertisement

Connecting the USB 3.0 cable

NOTE: To prevent data damage or loss, before changing USB upstream
ports, make sure that NO USB storage devices are in use by the
computer connected to the monitor's USB upstream port.
After you have completed connecting the HDMI/DP/USB Type-C cable, follow the
procedures below to connect the USB 3.0 cable to the computer and complete
your monitor setup:
1. a. Connect one computer: connect the upstream USB 3.0 port (cable
supplied) to an appropriate USB 3.0 port on your computer.
b. Connect two computers*: connect the upstream USB 3.0 ports to
appropriate USB 3.0 ports on the two computers. Then use the OSD menu to
select between the two USB upstream sources and input sources. See
Select
Switch.
2. Connect the USB 3.0 peripherals to the downstream USB 3.0 ports on the
monitor.
3. Plug the power cables for your computer(s) and monitor into a nearby outlet.
38
Setting Up the Monitor
a. Connect one computer
b. Connect two computers
USB

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

U4919dwb

Table of Contents