Nqa Configuration Task List - H3C S5820X Series Configuration Manual

NQA Configuration Task List

To perform TCP, UDP jitter or UDP echo tests, configure the NQA server on the peer device.
Complete the following task to enable the NQA server:
Configuring the NQA Server
To perform an NQA test successfully, make the following configurations on the NQA client:
1) Enable the NQA client
2) Create a test group and configure test parameters according to the test type. The test parameters
may vary with test types
3) Start the NQA test.
To view test results about the test, use the display or debug commands.
Complete these tasks to configure NQA client:
Enabling the NQA Client
Creating an NQA Test Group
Configuring an NQA Test Group
Configuring the Collaboration Function
Configuring Trap Delivery
Configuring the NQA Statistics Function
Configuring the History Records Saving Function
Configuring Optional Parameters Common to an NQA Test Group
Task
Task
Configuring an ICMP Echo Test
Configuring a DHCP Test
Configuring an FTP Test
Configuring a DNS Test
Configuring an HTTP Test
Configuring a UDP Jitter Test
Configuring an SNMP Test
Configuring a TCP Test
Configuring a UDP Echo Test
Configuring a DLSw Test
Required for TCP, UDP echo and UDP jitter tests
2-4
Remarks
Remarks
Required
Required
Required
Use any of the approaches
Optional
Optional
Optional
Optional
Optional