Running A Basic Program; Stopping A Basic Program - Allen-Bradley SLC 500 BASIC User Manual

Spare Allen-Bradley Parts
5. Enter a line of the BASIC program at the system prompt [
/-01
) /- /
* ,/+2/
)3 ,/ * 45-+ 6+/07
A BASIC program line always begins with a line number and must contain at least
one character, but no more than 68 characters.


6. Press to end the program line.

Running a BASIC Program

After entering your BASIC program, you are ready to run it. To run a BASIC
program, type at the system prompt [
/-01
)/8
5-+ 6+/0
/-01
)

Stopping a BASIC Program

To stop a program that is running, press


If
IMPORTANT
through a BASIC command. You must have jumper JW4 set in
the default position and cycle power to stop program execution.
(See page 3-4.)
].
>


.
is disabled, you cannot stop program execution
Programming Overview 4-9
].
>
Publication 1746-UM004A-US-P