Dhcp Server Settings; Dmz Settings - Planet Networking & Communication wnap-7325 User Manual

Outdoor wireless cpe 802/11 a/n

Hide thumbs Also See for wnap-7325:

Table of Contents

5.1.13 DHCP Server Settings

Click "Operation Mode"  "AP Router" or "Wireless ISP" and then enter the "DHCP Server Settings" by

clicking the Setup button next to it. This section allows you to configure the DHCP server.

Object

 DHCP Server

 Lease Time

 From

 To

Click "Operation Mode"  "AP Router" or "Wireless ISP" and then enter the "DMZ Settings" by clicking the

Setup button next to it. This section allows you to configure the DMZ server.

Figure 5-25 DHCP Server Settings

Description

Select as DHCP server or disable the function.

Select the time for using one assigned IP from the dropdown

list. After the lease time, the AP automatically assigns new IP

addresses to all connected computers.

The start IP address of all the available successive IPs.

The end IP address of all the available successive IPs.

Figure 5-26 DMZ Settings

-54-

User Manual of WNAP-7325/WNAP-7335

Table of Contents

Wnap-7335