Siemens 7SR105 Rho User Manual page 129

7SR105 Rho Technical Manual
(Also see the DNP 3.0 Implementation Table in
Need Time Interval, (Configurable, default 30 minutes)
Unsolicited Notification Delay, (Configurable, default 5 seconds)
Unsolicited Response Retry Delay, (Configurable (between 3 - 9), default 5 seconds)
Unsolicited Offline Interval, (Configurable, default 30 seconds)
Binary Change Event Scan Period, (Polled, Not Applicable)
Double Bit Change Event Scan Period, (Polled - Not Applicable)
Analog Change Event Scan Period, (Polled - Not Applicable)
Counter Change Event Scan Period, (Polled - Not Applicable)
Frozen Counter Change Event Scan Period, (Polled - Not Applicable)
String Change Event Scan Period, (Unsupported - Not Applicable)
Virtual Terminal Event Scan Period, (Unsupported - Not Applicable)
Sends/Executes Control Operations:
WRITE Binary Outputs
SELECT/OPERATE
DIRECT OPERATE
DIRECT OPERATE - NO ACK
Count > 1
Pulse On
Pulse Off
Latch On
Latch Off
Queue
Clear Queue
Attach explanation if "Sometimes" or "Configurable" was checked for any operation.
Reports Binary Input Change Events when no specific
variation requested:
Never
Only time-tagged
Only non-time-tagged
Configurable to send one or the other
Sends Unsolicited Responses:
Never
Configurable
Only certain objects
Sometimes (attach explanation)
ENABLE/DISABLE UNSOLICITED
Function codes supported
Default Counter Object/Variation:
No Counters Reported
Configurable
Default Object
Default Variation: _____
Point-by-point list attached
Sends Multi-Fragment Responses:
Yes
No
Configurable
Chapter 4 - Page 36 of 70
DNP V3.0
DEVICE PROFILE DOCUMENT
Section
Never Always
Never Always
Never Always
Never Always
Never Always
Never Always
Never Always
Never Always
Never Always
Never Always
Never Always
Reports time-tagged Binary Input Change Events when
no specific variation requested:
Never
Binary Input Change With Time
Binary Input Change With Relative Time
Configurable
Sends Static Data in Unsolicited Responses:
Never
When Device Restarts
When Status Flags Change
No other options are permitted.
Counters Roll Over at:
No Counters Reported
Configurable (attach explanation)
16 Bits
32 Bits
Other Value: _____
Point-by-point list attached
5.2, beginning on page 38).
Sometimes Configurable
Sometimes Configurable
Sometimes Configurable
Sometimes Configurable
Sometimes Configurable
Sometimes Configurable
Sometimes Configurable
Sometimes Configurable
Sometimes Configurable
Sometimes Configurable
Sometimes Configurable
© 2018 Siemens Protection Devices