T R O U B L E S H O O T I N G T I P S
Some Bulbs Do NOT Illuminate
1. Confirm the Color Strand LED has power.
2. Check if the bulbs are completely screwed into the base.
3. Confirm the corresponding Group/Zone of the bulb ON.
Some Bulbs Respond With A Delay and/or Do NOT Function As Desired
Move your thumb around the color wheel until all the controlled lamps sync to the same color.
Some Bulbs Do NOT Respond To The Remote Completely
Try assigning a Group/Zone to those bulbs, following the steps in the Assigning Groups/Zones.
13