Specifications - ADJ COLOR STRAND LED User Manual

S P E C I F I C A T I O N S
BULB
6W RGBW LED Bulb
50,000 Hour Average LED Life*
*May vary depending on several factors including but not limited to:
Environmental Conditions, Power/Voltage, Usage Patterns (On-Off and Program Cycling), Control, and Brightness.
COLOR
RGBW Color Mixing
CONTROL / CONNECTIONS
Wireless Remote Control
WiFi Frequency: 2.4 GHz
WiFi Range: Up To 65-98 Ft. (20-30m)*
*May vary depending on several factors including but not limited to:
Operation Environment, Walls, Metal, Glass, People, Direct Line of Sight, and Position of Remote
2pin IP44 Rated Power IN/OUT Ends
Power Cable
SIZE / WEIGHT - COLOR STRAND LED
Length: 44.8" (13.6 meters)
Width: 1.7" (44mm)
Horizontal Height: 4.6" (117mm)
Weight: 7.0 lbs. (3.2 kg)
ELECTRICAL / THERMAL
AC 86-265V - 50/60Hz
Single LED Bulb: 6W Max Power Consumption
Color Strand LED: 120W Max Power Consumption
Working Temperature: -40°F to 140°F (-40°C to 60°C)
RATINGS
IP44
FCC STA TEMENT
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device
may not cause harmful interference, and (2) this device must accept any interference received, including interference that
may cause undesired operation.
FCC RADIO FREQUENCY INTERFERENCE WARNINGS & INSTRUCTIONS
This product has been tested and found to comply with the limits as per Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a residential installation. This device uses and
can radiate radio frequency energy and, if not installed and used in accordance with the included instructions, may cause
harmful interference to radio communications. However, there is no guarantee that interference will not occur in a
particular installation. If this device does cause harmful interference to radio or television reception, which can be deter-
mined by turning the device off and on, the user is encouraged to try to correct the interference by one or more of the
following methods:
• Reorient or relocate the device.
• Increase the separation between the device and the receiver.
• Connect the device to an electrical outlet on a circuit different from which the radio receiver is connected. •
Consult the dealer or an experienced radio/TV technician for help.
15