Page 2
ADJ PRODUCTS LLC and all affiliated companies hereby disclaim any and all liabilities for property, equipment, building, and electrical damages, injuries to any persons, and direct or indirect economic...
C O N T E N T S General Information Limited Warranty (USA Only) Safety Instructions and Guidelines Overview Installation Instructions Trouble Shooting Tips Frequently Asked Questions Technical Specifications...
You may obtain a R.A. number by contacting customer support. CUSTOMER SUPPORT Contact ADJ Service for any product related service and support needs. Please visit forums.adj.com with questions, comments or suggestions.
To guarantee a smooth operation, it is important to follow all instructions and guidelines in this manual. ADJ PRODUCTS LLC is not responsible for injury and/or damages resulting from the misuse of these devices due to the disregard of the information printed in this manual. Only qualified and/or certified personnel should perform installation of these devices and only the original rigging parts included with these devices should be used for installation.
Page 7
S A F E T Y I N S T R U C T I O N S A N D G U I D E L I N E S INDOOR / DRY LOCATIONS USE ONLY! DO NOT EXPOSE DEVICES TO RAIN AND/OR MOISTURE! WHEN USING STAND OUTISDE UNDER STRONG WIND, TAKE APPROPRIATE MEASURES TO PREVENT IT FROM FALLING DOWN! TIGHTEN EACH KNOB AND BOLT SECURELY!
I N S T A L L A T I O N I N S T R U C T I O N S FLAMMABLE MATERIAL WARNING Keep devices minimum 5.0 feet (1.5m) away from flammable materials and/or pyrotechnics. ELECTRICAL CONNECTIONS A qualified electrician should be used for all electrical connections and/or installations.
Page 10
I N S T A L L A T I O N I N S T R U C T I O N S (continued) SETUP Loosen Knob B by turning it counter clockwise. Spread the legs by pulling up on the outer pipe until the stays extend horizontally.
Page 11
MOUNTING THE SPEAKER WITHOUT A BRACKET If the speaker (sold separately) has a pole mount socket located on the bottom of the speaker, place the speaker on top of the stand by lowering the speaker onto the inner pipe. Ensure that inner pipe fits securely into pole mount socket.
The maximum height of the stand is 6 ft. (1.83 m) 4. Are additional stands available? Yes. A variety of speaker stands and fixtures are available at www.adj.com. O P T I O N A L A C C E S S O R I E S...
T E C H N I C A L S P E C I F I C A T I O N S SPECIFICATIONS Heavy Duty Speaker Stand Weight capacity: 100 lbs. / 45.4 kg Recommended maximum height: 6 ft. (1.83 m) Inner Pipe Diameter: 1.625”...