QOLSYS IQ SMART SOCKET Installation Manual

IQ SMART SOCKET- INSTALLATION MANUAL
IQ SMART SOCKET
PARTS INCLUDED
1 IQ Smart Socket
The Qolsys IQ Smart Socket is an intelligent Z-Wave outlet
that not only provides the ability to turn devices on or off but
measures their current and historical energy output from the
built in LCD screen and from the IQ Panel interface.

PRODUCT FEATURES

• Provides two individually controlled outlets and green LED lights to
indicate each power on. (Max current 15A or 1800W total)
• Separately measures energy consumed by two individual attached
devices in real-time
• Displays individual outlet' s power consumption and constant power
rate
• Displays real-time power consumption per outlet
• Sends current power consumption to IQ Panel via Z-Wave radio
• Can be controlled remotely by IQ Panel, to switch each socket on
and off or to configure the Smart Socket control parameters.
• Sends all configuration status information to the IQ Panel
whenever manual button push configuration changes are made on
the Smart Socket.
• Design includes three buttons, one at bottom of the device and
two on the sides of the device
• Design includes one Smart Socket Control button on the bottom of
the device that shall perform the following functions:
• include/pair the smart socket to/from Z-Wave network & IQ Panel
• locally reset and un-pair the smart socket to/from IQ Panel
• Design includes two side mounted Power Outlet Control buttons,
one for each socket.
• Each button shall perform the following functions:
• turn on/off each outlet
• reset the meter data for each outlet
• turn on LCD display and LED back light for both outlets
• switch from kWh to Watts display units for each outlet
• Generate supervisory status signals and transmit to IQ Panel
QOLSYS CONFIDENTIAL AND PROPRIETARY PAGE OF
© Last revised 11/4/13 All rights reserved
1 4