QOLSYS IQ Mini Dw Extended S Line Quick Install Manual

IQ MINI DW EXTENDED S LINE QUICK INSTALL GUIDE
Also great for:
STEP CHOOSE
1
Medicine cabinets
INSTALLATION
Gun safes
LOCATION
✓
SEE REVERSE FOR REMAINING STEPS
This is a quick guide for experienced installers only. Refer to http://dealers.qolsys.com (login required)
Garage doors
Interior doors
✓
Windows
Cabinets
✓
SPECIFICATIONS
Sensor: 2.5"H x 1"W x .5"D
Wireless signal range: 600ft (200M), open air.
Code outputs: tamper, tamper restore, alarm (primary open), alarm restore
(primary close), external alarm (secondary wired open), external restore
Exterior Doors (secondary wired closed), low battery.
Transmitter frequency: 319.5 MHz
Unique code ID
✓
Supervisory keep-alive interval: 70 minutes.
RF Peak field strength: typical 36000 uV/m at 3m
Operating Temperature: -10C~50C
Relative Humidity: 5-95% Non-Condensing
Storage Temperature: -40-80C
Replace battery with exact replacement every 5 years with 3V CR2032
Lithium (x2).
✓
USING EXTERNAL TERMINALS
Safes
Connect wired devices such as
garage door contacts, door window
contacts, and panic switches using
the external terminals. Wire lead
length should not exceed 20' .