QOLSYS IQ Doorbell Quick Install Manual

Download this manual

IQ DOORBELL QUICK INSTALL GUIDE

OVERVIEW

The IQ Doorbell is a great way to make the home' s existing doorbell unit "smarter". The IQ Doorbell

wires effortlessly into an existing door bell using the included pre-stripped leads, and can support up

to two separate doorbells, like the front and back door. Because each doorbell learns in as two

different zones, you can program custom chimes and rules for each.

RED WIRE - FRONT

BLACK WIRE - TRANS

WHITE WIRE - REAR

This is a quick guide for experienced installers only. For a detailed installation manual refer to the documentation found on

the "Documentation" tab on http://dealers.qolsys.com (login required, request access at PortalAccess@Qolsys.com)

IQ Doorbell

QS1119-840

SPECIFICATIONS

Sensor: 2.5"H x 1"W x .5"D

Wireless signal range: 600ft (200M), open air.

Code outputs: tamper, tamper restore, alarm, alarm

restore, low battery.

Transmitter frequency: 319.5 MHz

Unique code ID

Supervisory keep-alive interval: 70 minutes.

RF Peak field strength: typical 36000 uV/m at 3m

Operating Temperature: -10C~50C

Relative Humidity: 5-95% Non-Condensing

Storage Temperature: -40-80C

Replace battery with exact replacement every 5 years

with 3V Lithium (x2).

(2) -Panasonic CR2032

-Energizer CR2032

-Duracell DL2032

Page 1: Specifications
OVERVIEW SPECIFICATIONS The IQ Doorbell is a great way to make the home’ s existing doorbell unit “smarter”. The IQ Doorbell Sensor: 2.5”H x 1”W x .5”D wires effortlessly into an existing door bell using the included pre-stripped leads, and can support up to two separate doorbells, like the front and back door.
Page 2 Touch Touch Touch “Security Touch repeat Step 4 to learn your sensor type and ensure proper opening cover until you “Installation” in the IQ Doorbell a “Settings” Sensors” “AutoLearn customize settings as function hear the panel chime second time. Sensor”...

Qs1119-840