QOLSYS QS-1100-P01 Quick Install Manual

IQ DOOR/WINDOW QUICK INSTALL GUIDE
Also great for:
STEP CHOOSE
1
Medicine cabinets
INSTALLATION
Gun safes
LOCATION
✓
Sliding
glass
doors
SEE REVERSE FOR REMAINING STEPS
Garage doors
Interior doors
✓
Windows
This is a quick guide for experienced installers only. Refer to http://dealers.qolsys.com (login required)
SPECIFICATIONS
Sensor: 3.25"H x 1.3"W x 1"D (8x3x1.5 cm)
Magnet: 1.3"H x 0.435"W x 0.312"D (3.3 x 1.1 x 0.79 cm)
Wireless signal range: 600ft (200M), open air.
Exterior Doors Code outputs: tamper, tamper restore, alarm (primary
open), alarm restore (primary close), external alarm
✓
(secondary wired open), external restore (secondary wired
closed), low battery.
Transmitter frequency: 319.5 MHz
Unique code ID
Supervisory keep-alive interval: 70 minutes.
RF Peak field strength: typical 36000 uV/m at 3m
Operating Temperature: -10C~50C
Relative Humidity: 5-95% Non-Condensing
Storage Temperature: -40-80C
Replace battery with exact replacement every 5 years
with 3V CR2032 Lithium (x2).