Yaesu FTA-750 Operating Manual page 19

Adjusting the frequency
 You may turn the DIAL
selector (outer) knob on
the top panel to choose
the desired operating
frequency. The channel
frequency will appear
on the LCD.
 Directly entering frequencies from the keypad is the
easiest method if you know the frequency on which
you wish to operate. Just enter the five digits of the
frequency to move to that frequency.
F o r e x a m p l e , t o s e t
134.35 MHz,
press [ 1 ]  [ 3 ]  [ 4 ]
 [ 3 ]  [ 5 ] .
To set 118.275 MHz,
y o u d o n o t n e e d t o
press the final "5" in the
frequency as below:
[ 1 ]  [ 1 ]  [ 8 ]  [ 2 ]
 [ 7 ] .
FTA-750/FTA-550 O
B o
asIc
13-.---
VOL
M
perATing AnuAl
peratIon
 You may recall the op-
erating frequency that
you have used by press-
ing the [ ◄ ] or [ ► ] key.
FCC ID: K6650013X20
IC: 511B-50013X20
BUSY
133.800
KLAX-ATIS
VOL
2:132.400 KSAN-GND
3:134.800 KSAN-TWR
4:127.600 KSAN-APP
5:119.150 KSAN-ATI
6:124.250 KLGB-TWR
7:129.200 KLGB-DEP
17
YAESU MUSEN CO., LTD.