Side Tone Control
When utilizing an external headset, you may monitor
your own voice talking to the microphone through the
headphone.
To activate the monitoring of your voice (side tone),
select one of the following side tone level on the
item "SIDE TONE" of the CONFIGURATION menu in
the SETUP mode.
MIN/LEVEL1/LEVEL2/MAX
CONFIGURATION
AF PITCH CONT
LOCK SELECT
MIC SELECT
SIDE TONE
VOX
VOX SENSE
VOX DELAY
RESET
To change the side tone level temporarily during the
monitoring, press the [ ◄ ] or [ ► ] key or rotate the
DIAL selector knob when pressing and holding the
PTT switch.
FTA-750/FTA-550 O
a
dVanced
CONFIGURATION
SIDE TONE
OFF
MIN
LEVEL1
LEVEL2
MAX
M
perATing
AnuAl
o
peratIon
ANL Feature
For reduction of impulse noise, such as that produced by
an engine's ignition system, the ANL (automatic noise
limiter) feature may prove helpful.
To activate the ANL, select "ANL" and press the [ ENT ]
key in the FUNCTION menu.
FUNCTION
SCAN MEM
DUAL WATCH
SCAN
ANL
SPLIT
LOGGER
FCC ID: K6650013X20
IC: 511B-50013X20
OFF
OFF
OFF
OFF
OFF
OFF
41
YAESU MUSEN CO., LTD.