Taylor-Dunn E0-455-24 Service And Replacement Parts Manual page 92

Suspension
REPLACE REAR RUBBER SPRINGS
WARNING
This section is one section of a complete service
manual. Before starting any procedure, read all
warnings and instructions that are located in the
Service Guidelines chapter.
1: If a spring has failed or is fatigued, then it is recommended that both rear springs are replaced as a set.
2: Remove the nuts and washers from the spring bolts.
3: Raise the rear of the vehicle just high enough so that the springs bushings can be removed and support with
jack stands.
4: Remove and install the new bushings.
5: Lower the vehicle and carefully guide the spring bolts into the holes in the frame.
6: Install the nuts and washers on the spring bolts.
7: Reconnect the battery.
8: Test drive
Page 92
E-455
ME-455-04