Table of Contents
Advertisement
Smart SAM2W User Guide V1.2
AT$TCPMODE=0
Modem does not make TCP connection to remote TCP server after connected to GPRS.
AT$TCPMODE=1
Modem makes TCP connection to remote TCP server after connected to GPRS.
Default is 0.
AT$TCPMODE?
$TCPMODE: 0
OK
AT$GSMMODE
Set modem operating mode. This command is for serial port entry only.
AT$GSMMODE=0
Modem available for both GSM and GPRS. It makes and maintains GPRS connectivity after power on.
AT$GSMMODE=1
Modem works in GSM mode only. This mode prevents modem from resetting if SIM is not setting up for
GPRS connectivity.
Default is 0.
AT$GSMMODE?
$GSMMODE: 0
OK
17
Ver1.2
Advertisement
Table of Contents
Need help?
Do you have a question about the Smart SAM2W and is the answer not in the manual?