Advertisement
Quick Star t Guide
802.11ac Cloud-based Indoor Dual Band Enterprise Acess Point
ECW7211-L
1. Unpack the AP
www.edge-core.com
The ECW7211-L AP includes its own built-in features for mounting the unit to a wall
or suspended ceiling T-rail.
Note:
For Safety and Regulatory information, refer to the Safety and Regulatory
Information document included with the AP.
Caution:
The planning and installation of the AP requires professional personnel
that are trained in the installation of radio transmitting equipment. The user is
responsible for compliance with local regulations concerning items such as
antenna power, use of lightning arrestors, grounding, and radio mast or tower
construction. Therefore, it is recommended to consult a professional contractor
knowledgeable in local radio regulations prior to equipment installation.
Follow these steps to install the AP:
Unpack the AP and check the package contents.
◆
802.11a/ac/b/g/n Wireless Access Point
◆
AC power adapter
◆
Console cable
◆
Ceiling-mount accessory
◆
Four adhesive foot pads
◆
Documentation — Quick Start Guide (this guide) and Regulatory and Safety
Information
– 1 –
E012015-AP-R01
150200001031A
Advertisement
Table of Contents
Related Manuals for Edge-Core ECW7211-L
Summary of Contents for Edge-Core ECW7211-L
- Page 1 Quick Star t Guide 802.11ac Cloud-based Indoor Dual Band Enterprise Acess Point ECW7211-L The ECW7211-L AP includes its own built-in features for mounting the unit to a wall or suspended ceiling T-rail. Note: For Safety and Regulatory information, refer to the Safety and Regulatory Information document included with the AP.
-
Page 2: Mounting On A Wall
Quick Start Guide 2. Mount the AP After planning your installation, mount the unit on a wall or suspended ceiling T-rail. Mounting on a Wall Set two screws in the wall 116 mm (4.57 in.) apart. Slide the AP’s wall mounting slots down onto the screws so that the unit is secure. Mounting on a Ceiling T-rail Position the ceiling-mount accessory clip holders on either side of the T-rail. -
Page 3: Connect Cables
Quick Start Guide 3. Connect Cables Connect network cable to the Eth0/PoE 1000BASE-T RJ-45 port for your network connection. The Etho/PoE port connection can also provide PoE power to the unit. (Optional) Connect a local LAN switch or computers to the LAN1 and LAN2 100BASE-TX RJ-45 ports. -
Page 4: Verify Ap Operation
Log in to the web interface using the default settings: ◆ Login Name — root ◆ Password — admin123 For more information on AP configuration using the web interface, refer to the Management Guide, which is on the Edge-Core web site, www.edge-core.com. – 4 –... -
Page 5: Hardware Specifications
Quick Start Guide Hardware Specifications Item Specification Chassis Size (W x D x H) 200 x 200 x 36.5 mm (7.87 x 7.87 x 1.44 inch) Weight 750 g (1.65 lb) Temperature Operating: 0 °C to 45 °C (32 °F to 113 °F) Storage: -40 °C to 70 °C (-40 °F to 158 °F) Humidity Operating: 5% to 95% (non-condensing)
Need help?
Do you have a question about the ECW7211-L and is the answer not in the manual?
Questions and answers