Table of Contents
Advertisement
6 - a)
Input Roller
Before starting this operation,
please read the general advice
which appears in the beginning
part of this section.
Remove the Input Roller module
as explained in Page 43 and
clean in the following procedure.
Wet and squeeze a piece of soft
cloth with alcohol for cleaning
OA equipment and wipe in the
direction as illustrated.
Rotate the roller slowly and
clean all surface. After cleaning,
wipe with a dry cloth and leave
about 1 minute to dry up before
reinstalling.
After wiping off, wait till it becomes completely dry before inserting it again.
- 37 -
Hide quick links:
Advertisement
Table of Contents
