Cooler Assembly (With Thermal Valve) - Vanair Reliant RS45 Installation, Operation, Maintenance And Parts Manual

RELIANT RS45 AIR COMPRESSOR

7.5 COOLER ASSEMBLY (WITH THERMAL VALVE)

VANAIR MANUFACTURING, INC.
(844) VAN-SERV • www.vanair.com
ASSEMBLY DRAWING STANDARD NOTES:
1. USE LOCTITE 567 THREAD SEALANT WITH PTFE OR EQUIVALENTSEALANT ON ALL MALE
2.
3.
4.
5.
6.
090126-OP_r0 (JAN-2018)
SECTION 7: ILLUSTRATED PARTS LIST
KEY DESCRIPTION
NO.
1 RELAY, NO/NC WEATHERPROOF w/
RESISTOR
2 ELBOW, 90 DEG #8 MJIC x #8 MSAE
3 ELBOW, 90 DEG #10 MJIC x #8 MSAE
4 FAN AND MOTOR ASSY.
5 COOLER, OIL 60-85 CFM SAE O-RING
6 COOLER, OIL NK40 SAE O-RING
7 SHROUD, FAN MOUNTING
8 BRACKET, RIGHT COOLER MOUNTING
9 BRACKET, LEFT COOLER MOUNTING
10 FOAM, SOUND INSULATION COOLER
SHROUD
11 SPACER, NYLON RS45 COOLER
12 NUT, HEX LOCKING 1/4-20
13 CAPSCREW, HEX GR5 1/4-20 x 0.75
14 CAPSCREW, HEX GR8 1/4-20 x 0.75
15 SCREW, SER WASH 5/16-18 x 0.75
16 WASHER, FLAT 1/4
17 WASHER, LOCK 1/4
PLEASE NOTE: WHEN ORDERING PARTS, INDICATE MACHINE
SERIAL NUMBER.
PIPE THREADS.
LUBRICATE ALL ELASTOMERIC SEALS/GASKETS/O-RINGS BEFORE TIGHTENING.
ALL BOLTS TO BE TORQUED TO THEIR RESPECTIVE SAE TORQUE SPECIFICATIONS, FOR
THEIR GRADES AND SIZES, UNLESS OTHERWISE SPECIFIED.
CHECK CONTINUITY OF COALESCER ELEMENT.
REMOVE, LUBRICATE GASKET AND THEN HAND TIGHTEN OIL FILTER.
DISCARD METAL RING FROM FITTING, LEAVE O-RING.
,
PART QTY
NUMBER
260246 1
260403-104 2
260403-105 2
264856 1
275072 1
275073 1
277420 1
277425-AL 1
277426-AL 1
278201-008 1
278289 4
825504-145 1
829104-075 1
829404-075 4
829705-075 12
838204-071 2
838504-062 4
6020197ID_r2
PAGE - 53