Table of Contents
Advertisement
SECTION1: SAFETY
opening the fill cap. Remove all electrical
power.
Slowly remove fill cap to vent compressor
sump pressure.
•
DO NOT use the compressor for
purposes other than for which it is
intended. High pressure air can cause
serious and even fatal injuries.
•
DO
NOT
operate
outside of its specified pressure and
speed
ratings.
Specifications or refer to the equipment
data plate.).
•
DO NOT use flammable solvents or
cleaners for cleaning the compressor or
its parts.
•
DO NOT operate the compressor in
areas
where
corrosive fumes, or other damaging
substance can be ingested by the
compressor intakes.
•
Keep arms, hands, hair and other body
parts, and clothing away from fans, drive
shafts, and other moving parts.
•
DO NOT wear jewelry, unbuttoned cuffs,
ties, or loose-fitting clothing when you are
working near moving/rotating parts.
•
ALWAYS confine long hair when working
near moving/rotating parts.
•
NEVER operate the equipment while
wearing a headset to listen to music or the
radio.
•
Wear personal protective equipment such as
gloves, work shoes, and eye and hearing
protection as required for the task at hand.
•
DO NOT operate the compressor with
any guards removed or damaged, or
other safety devices inoperative.
•
DO NOT operate the compressor in
enclosed or confined spaces where
ventilation is restricted or closed-off.
•
Ensure that hoses connected to service
valves are fitted with correctly sized and
rated flow limiting devices which comply
with
applicable
broken or disconnected hoses can whip,
causing injuries or damage.
•
DO NOT use tools, hoses, or equipment
that have maximum ratings below that of
this compressor.
PAGE - 2
NOTE
the
compressor
(See
Section
2:
flammable,
toxic,
or
codes.
Pressurized
090126-OP_r0 (JAN-2018)
RELIANT RS45 AIR COMPRESSOR
•
Keep metal tools, and other conductive
objects
away
components.
•
Before performing maintenance or repair
operations on the compressor, ensure
that all power has been removed and
been locked out to prevent accidental
application.
•
DO NOT assume that because the
compressor is in a STOPPED condition
that hydraulic power has been removed.
•
Use this compressor only to compress
atmospheric air. Use of this equipment
as a booster pump and/or to compress
any other gaseous or aerosol substance
constitutes improper use. It can also
cause damage or injuries. Such misuse
will also void the warranty.
•
Install,
operate,
equipment in full compliance with all
applicable OSHA, other Federal, state,
local codes, standards, and regulations.
•
When lifting objects, be aware of proper
lifting techniques to avoid injury.
•
ALWAYS read and follow safety related
precautions found on containers of
hazardous substances.
1.2.3
CAUTIONS
Identifies actions or conditions which will
or can cause injuries, equipment damage or
•
Check all safety devices for proper
operation on a routine basis.
•
Ensure that no tools, rags, or other
objects are left on compressor drive
systems or near intakes.
•
Keep
the
equipment
performing
maintenance
actions. Cover openings to prevent
contamination.
•
DO NOT operate the compressor if
cooling air is not available (fan/cooler not
operating) or if lubricant levels are below
their specified minimum levels.
•
Ensure all plugs, hoses, connectors,
covers, and other parts removed for
maintenance
before
applying
compressor.
from
live
electrical
and
maintain
this
CAUTION
malfunctions.
clean
when
or
service
actions
are
replaced
power
to
the
VANAIR MANUFACTURING, INC.
(800) 526-8817 • www.vanair.com
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
