Notes; Safety Decals; Disposing Of Machine Fluids - Vanair Reliant RS45 Installation, Operation, Maintenance And Parts Manual

RELIANT RS45 AIR COMPRESSOR
• Avoid touching
components.
• Ensure that electrical wiring, terminals;
hoses and fittings are kept in serviceable
condition through routine inspections
and maintenance.
damaged or worn components.

1.2.4 NOTES

Additional information (or existing
information) which should be brought to the
attention of operators/maintainers affecting
operation, maintenance, or warranty
Note boxes are usually listed to convey and
give focus to a distinct piece of information,
which is not directly related to a safety issue,
but is necessary to understand machine
function and operation. Special note referrals
in the manual may be contained in a box
titled with an IMPORTANT banner, as shown
below, and may also contain the WARNING
symbol, should the information be linked to a
safety issue:
IMPORTANT
Additional, CRUTIAL information (or existing
information) which should be brought to the
attention of operators/maintainers affecting
operation, maintenance, or warranty
VANAIR MANUFACTURING, INC.
(800) 526-8817 • www.vanair.com
hot surfaces and
Replace any
NOTE
requirements.
requirements.
090126-OP_r0 (JAN-2018)
1.3

SAFETY DECALS

Safety decals are placed onto, or located
near, system components that can present a
hazard to operators or service personnel. All
pertinent decals listed in Section 7.15,
Decals, are located near a component which
is subject to respect in terms of safety
precautions. Always heed the information
noted on the safety decals.
DO NOT REMOVE OR COVER ANY
SAFETY DECAL. Replace any safety decal
that becomes damaged or illegible.
1.4 DISPOSING OF MACHINE
FLUIDS
Always dispose of machine fluids under the
guidance of all applicable local, regional and/
or federal law.
®
Vanair encourages recycling when allowed.
For additional
container label of the fluid in question.
SECTION 1: SAFETY
WARNING
information, consult
PAGE - 3
the