Table of Contents
Advertisement
B.6
Final LRU Software Load
1. Go to the Software Upload page using the FMS knob.
B.6.1
GMA 1347 Audio Panel Software
1. Highlight the GMA software file. Ensure that both paths to the GMA through GIA1 and GIA 2
appear in the LRU field as shown:
2. Press the LRU softkey. Select the GMA1 - GIA1 data path to load software. Press the LOAD
softkey.
3. Select YES and press the ENT key to acknowledge the following prompt:
4. The software for the GMA 1347 Audio Panel begins to load. Monitor the upload status as it
progresses:
5. After the files finish loading, press ENT to acknowledge the following prompt:
6. Check the SUMMARY field to ensure the load is 'COMPLETE'.
Page B-8
Revision 6
G1000/DA40 System Maintenance Manual
190-00303-03
Advertisement
Table of Contents
Troubleshooting
