Gia Software Load - Garmin Diamond DA 40 Maintenance Manual

B.4

GIA Software Load

1. Go to the Software Upload page using the FMS knob.
2. Activate the cursor and select the GIA 63 software file. Verify that GIA1 and GIA2 appear in the
LRU field as shown:
3. Press the LOAD softkey.
4. Select YES and press ENT to acknowledge the following prompt:
5. The software for GIA1 begins to load. GIA2 software loads immediately after GIA1 software
finishes loading. Monitor the upload status as it progresses:
6. After the files finish loading, press ENT to acknowledge the following prompt:
7. View the SUMMARY field and verify that both GIA1 and GIA2 software loading is complete.
G1000/DA40 System Maintenance Manual
190-00303-03
Page B-5
Revision 6