B.6.4
GMU 44 Magnetometer Software
1. Highlight the GMU44 software file. Ensure that GMU1 appears in the LRU field as shown:
2. Press the LOAD softkey.
3. Select YES and press the ENT key to acknowledge the following prompt:
4. The software for the GMU 44 Magnetometer begins to load. Monitor the upload status as it
progresses:
5. After the files finish loading, press the ENT key to acknowledge the following prompt:
6. Check the SUMMARY field to ensure the load is 'COMPLETE'.
G1000/DA40 System Maintenance Manual
190-00303-03
Page B-11
Revision 6