Figure 3-9. Set>Actv Diagram - Garmin Diamond DA 40 Maintenance Manual

In the first example shown in Figure 3-9, the SET columns do not match the ACTIVE columns. The
inequality between SET and ACTIVE indicates a configuration mismatch. By pressing the SET>ACTV
softkey, this copies the SET column to the LRU unit's configuration memory. The settings then become
the ACTIVE settings for the LRU being configured.
Figure 3-9. SET>ACTV Diagram
G1000/DA 40 System Maintenance Manual Page 3-9
190-00303-03 Revision 6