VeriFone Carbon 8 Installation Manual page 26

S
ETUP
Connecting the Power Pack
To connect the power
pack
WARNING
26
C 8 I
ARBON NSTALLATION
1
Turn the Stand over to access the power port.
2
Insert the round barrel connector (see A in Figure 15) into the power port, then
tuck the cable under the Stand leg nearest the power port.
Figure 15 Power Connection
3
Connect the power adapter to the power brick (see B in Figure 15).
4
Plug the AC power pack into a wall outlet or power surge protector.
Do not plug the power pack into an outdoor outlet or operate the terminal
outdoors.
Disconnecting the power during a transaction may cause transaction data files
not yet stored in terminal memory to be lost.
To protect against possible damage caused by lightning strikes and electrical
surges, consider using a power surge protector.
G
UIDE