Establishing Communication; Connecting By Ethernet Cable; Connecting By Wi-Fi - VeriFone Carbon 8 Installation Manual

S
ETUP

Establishing Communication

WARNING
Establishing
Communication
Connecting by
Ethernet Cable

Connecting by Wi-Fi

18
C 8 I
ARBON NSTALLATION
Figure 4 shows the power, communications and connection ports for the Carbon 8
Stand.
POWER
PORT
ETHERNET
PORT
0.5 A USB
PORTS
Figure 4 Power and Communication Ports
Do not connect the device to the power supply until all peripherals are attached.
You can connect the Carbon 8 Stand to your network using an ethernet cable. You
can also connect using the Wi-Fi option.
Connect the ethernet cable to the ETH port on the stand, then route it directly to a
network jack (see Figure
Figure 5 Ethernet Connection
Connect to Wi-Fi by enabling Wi-Fi connectivity on the Tablet or Stand. Select this
option from the Network Settings on the Merchant Tablet.
G
UIDE
5). This is a direct connection to your network.
1 A USB
PORT
CASH DRAWER
PORT
SERVICE
PORT
(SERVICE USE ONLY)