Supported File Types - Keysight M8194A User Manual

3 M8194A Soft Front Panel

Supported File Types

94
TXT
Compatibility: Keysight M8190A, Tek AWG 7000
One file contains waveform samples for one M8194A channel as
normalized values (-1.0 .. +1.0) and (optionally marker values) separated
by ',' or ';' or '\t'. Not given marker values are just set to 0. Space ' ' and '\t'
are ignored. Line end can be \r or \r\n. The waveform samples can be
imported to any of the four M8194A channels.
Example (US locale)
0.7,0,1
0.9,1
Example (German locale):
0,7;0;1
0,9;1
In German locale it is recommended (but not required) to use ';' or '\t' as
NOTE
separator. But it must then be ensured that the double really has a
decimal point (',') or there is some space inserted to ensure correct
parsing:
0,7,0,1
0,0,1
BIN
Compatibility: Keysight M8194A.
One file contains waveform samples for one channel. The waveform
samples can be imported to any of the four M8194A channels. Samples
consist of binary int16 values (in little endian byte order).
Keysight M8194A 120 GSa/s Arbitrary Waveform Generator User Guide