Power And Ventilation Requirements; Thermal Protection; Battery; Operating Environment - Keysight M8194A User Manual

5 M8194A Maintenance

Power and Ventilation Requirements

Thermal Protection

Battery

Operating Environment

160
For power and ventilation requirements, refer to:
• http://www.keysight.com/find/M9514A
documentation.
• http://www.keysight.com/find/M9505A
documentation.
• http://www.keysight.com/find/M9502A
documentation.
Overheating Detection
The instrument monitors its internal temperature. If the temperature
exceeds approximately 80°C the power supply is switched off. The
instrument will not turn on automatically if the temperature is decreasing
again.
Fan Failure
If a fan is broken or prevented from operating by a blockage the
temperature will increase. When the temperature exceeds approximately
80°C the overheating detection switches off the instrument for safety
reasons. For reliability it is recommended to send instruments with broken
or defective fans immediately to Keysight Service for repair.
The M8194A module does not have a battery.
For details on operating environment for M8194A module, refer to the
section Operating Environment
Keysight M8194A 120 GSa/s Arbitrary Waveform Generator User Guide
for 14-slot chassis related
for 5-slot chassis related
for 2-slot chassis related
on page 161.