Safety Summary - Keysight M8194A User Manual

Safety Summary

Initial Inspection
General
Keysight M8194A 120 GSa/s Arbitrary Waveform Generator User Guide
The following general safety precautions must be observed during all phases of operation
of this instrument. Failure to comply with these precautions or with specific warnings or
operating instructions in the product manuals violates safety standards of design,
manufacture, and intended use of the instrument. Keysight Technologies assumes no
liability for the customer's failure to comply with these requirements. Product manuals
are provided with your instrument on CD-ROM and/or in printed form. Printed manuals
are an option for many products. Manuals may also be available on the Web. Go to
www.keysight.com
page. Safe operation and the general safety precautions for the M9502A and M9505A
AXIe chassis, must be followed. See: http://www.keysight.com/find/M9505A.
To ensure mandatory safety requirements are being met, the module
WARNING
must be installed in a chassis which has been certified and marked by
a Nationally Recognized Testing Lab (such as CSA, UL, TUV, ETL etc.) in
which all the means of protection are properly implemented.
NOTE: CE marking alone is not adequate.
This product has been designed and tested in accordance with accepted
NOTE
industry standards, and has been supplied in a safe condition.
The documentation contains information and warnings that must be
followed by the user to ensure safe operation and to maintain the
product in a safe condition.
Inspect the shipping container for damage. If there is damage to the container or
cushioning, keep them until you have selected the contents of the shipment for
completeness and verified the instrument both mechanically and electrically. The
Performance Tests give procedures for checking the operation of the instrument. If the
contents are incomplete, mechanical damage or defect is apparent, or if an instrument
does not pass the operator's checks, notify the nearest Keysight Technologies
Sales/Service Office.
WARNING To avoid hazardous electrical shock, do not perform electrical tests when
there are signs of shipping damage to any portion of the outer enclosure (covers, panels,
etc.).
This product is a Safety Class 3 instrument (provided with a protective earth terminal).
The protective features of this product may be impaired if it is used in a manner not
specified in the operation instructions.
and type in your product number in the Search field at the top of the
3