Advertisement
4.
Always keep the extension cord away from moving parts on the tool.
5.
When holding a tool to be sharpened (ie. chisel), always maintain a firm grip
on the tool with both hands to resist starting torque.
7.
Avoid unintentional starting. Make sure you are prepared to begin work before
turning on the Sharpener.
8.
Do not force the Sharpener. This tool will do the work better and safer at the
speed and capacity for which it was designed.
9.
Do not sharpen with liquids. This tool is designed for dry sharpening only.
10.
Never leave the Sharpener unattended when it is plugged into an electrical
outlet. Turn off the tool, and unplug it from its electrical outlet before leaving.
11.
Always unplug the Sharpener from its electrical outlet before performing any
inspection, maintenance, or cleaning procedures.
12.
Be careful of Bits when sharpening. Bits will become very hot (and sharp)during
the sharpening process. Allow them to cool before touching or storing.
13.
Sharpening head may become hot during use. This is a normal condition and
no cause for alarm. Be careful when handling.
14.
This tool should only be used on a flat, sturdy surface, capable of supporting
the Sharpener, any tools or accessories used, and the pressure exerted dur-
ing use.
15.
WARNING! Some dust created by power sanding, sawing, grinding, drilling,
and other construction activities, contain chemicals known (to the State of Califor-
nia) to cause cancer, birth defects or other reproductive harm. Some examples of
these chemicals are: lead from lead-based paints, crystalline silica from bricks and
cement or other masonry products, arsenic and chromium from chemically treated
lumber. Your risk from these exposures varies, depending on how often you do this
type of work. To reduce your exposure to these chemicals: work in a well ventilated
area, and work with approved safety equipment, such as those dust masks that are
specially designed to filter out microscopic particles.
(California Health & Safety Code 25249.5, et seq.)
16.
WARNING! People with pacemakers should consult their physician(s) before
using this product. Electromagnetic fields in close proximity to a heart pacemaker
could cause interference to or failure of the pacemaker.
SKU 91674
For technical questions, please call 1-800-444-3353.
Page 9
Advertisement
