Advertisement
6.
If you are using an extension cord outdoors, make sure it is marked with the
suffix "W-A" ("W" in Canada) to indicate it is acceptable for outdoor use.
7.
Make sure your extension cord is properly wired and in good electrical condition.
Always replace a damaged extension cord or have it repaired by a qualified
electrician before using it.
8.
Protect your extension cords from sharp objects, excessive heat, and damp or
wet areas.
RECOMMENDED MINIMUM WIRE GAUGE FOR EXTENSION CORDS*
NAMEPLATE
AMPERES
(At Full Load)
0 - 2.0
2.1 - 3.4
3.5 - 5.0
5.1 - 7.0
7.1 - 12.0
12.1 - 16.0
16.1 - 20.0
FIGURE C
1.
Maintain labels and nameplates on the Sharpener. These carry important infor-
mation. If unreadable or missing, contact Harbor Freight Tools for a replacement.
2.
Always wear ANSI approved safety impact eye goggles and heavy work gloves
when using the Sharpener. Using personal safety devices reduce the risk for
injury. Safety impact eye goggles and heavy work gloves are available from Har-
bor Freight Tools.
3.
Maintain a safe working environment. Keep the work area well lit. Make sure
there is adequate surrounding workspace. Always keep the work area free of ob-
structions, grease, oil, trash, and other debris. Do not use a power tool in areas near
flammable chemicals, dusts, and vapors. Do not use this product in a damp or wet
location.
SKU 91674
For technical questions, please call 1-800-444-3353.
(120 VOLT)
EXTENSION CORD LENGTH
25 FEET
50 FEET
18
18
18
18
18
18
18
16
18
14
14
12
12
10
*Based on limiting the line voltage drop
to five volts at 150% of the rated amperes.
SPECIFIC SAFETY RULES
75 FEET
100 FEET
16
16
16
14
16
14
14
12
12
10
10
-
-
-
150 FEET
16
14
12
12
-
-
-
Page 8
Advertisement
