1. Manuals
  2. Brands
  3. IC Realtime Manuals
  4. Security Camera
  5. ICIP D3000AVIR-M
  6. User manual

IC Realtime ICIP D3000AVIR-M User Manual

Hd network dome camera
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
HD Network Dome Camera User's Manual
Version 1.2.3

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the ICIP D3000AVIR-M and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for IC Realtime ICIP D3000AVIR-M

Summary of Contents for IC Realtime ICIP D3000AVIR-M

  • Page 1 HD Network Dome Camera User’s Manual Version 1.2.3...
  • Page 2 Welcome Thank you for purchasing our network camera! This user’s manual is designed to be a reference tool for your system. Please read the following safeguard and warnings carefully before you use this series product! Please keep this user’s manual well for future reference!
  • Page 3 Important Safeguards and Warnings 1．Electrical safety All installation and operation here should conform to your local electrical safety codes. The power shall conform to the requirement in the SELV (Safety Extra Low Voltage) and the Limited power source is rated 12V DC or 24V AC in the IEC60950-1. (Refer to general introduction) Please note: Do not connect two power supplying sources to the device at the same time;...
  • Page 4 Do not touch the CCD (CMOS) optic component. You can use the blower to clean the dust on the lens surface. Always use the dry soft cloth to clean the device. If there is too much dust, please use the water to dilute the mild detergent first and then use it to clean the device.

  • Page 5: Table Of Contents

    Table of Contents General Introduction ........................1 Overview ........................1 Features ......................... 1 Specifications ........................ 2 1.3.1 Performance ......................2 Structure ............................5 Dimensions ........................5 Port Description ......................6 Listening ......................... 8 Bidirectional talk......................9 2.4.1 Device-end to PC-end ..................9 2.4.2 PC-end to the Device-end ..................
  • Page 6 Quick Configuration Tool ......................19 Overview ........................19 Operation ........................19 Web Operation .......................... 21 Network Connection ....................21 Login and Main Interface ................... 21 FAQ ............................23 Appendix Toxic or Hazardous Materials or Elements ............... 24...

  • Page 7: General Introduction

    1 General Introduction 1.1 Overview This series network camera combines traditional camera and network video technology into one unit which integrates A/V data collection and transmission through network without aux devices. It uses advanced H.264 and MJPEG video compression technology and G.711a audio compression technology, which maximally guarantee the audio and video quality.

  • Page 8: Specifications

    Support 3D NR.  Support video watermark function to avoid vicious video modification. 1.3 Specifications 1.3.1 Performance Please refer to the following sheets for network camera performance specification. Model ICIP D3000AVIR-M Parameter Main High performance DSP Processor Embedded LINUX System Support real-time network monitoring, local record, and remote operation.
  • Page 9 extra stream 1(704*480@30fps) extra stream 2(1280*720@1fps) Note: Extra stream 2’s actual frame depends on device max capacity set which can be adjusted within its range. H.264H: 40Kbps-8193Kbps. It is adjustable Video Bit Rate MJPEG: 40Kbps-16384Kbps adjustable and bit rate is adjustable. Support customized setup.
  • Page 10 Dimensions(m ¢151×119 Weight 1.25 kg Installation Support various installation modes...

  • Page 11: Structure

    2 Structure 2.1 Dimensions You can refer to the following figures for dimension information. The Unit is mm. See Figure 2- 1(vandal- proof series), Figure 2- 2 (vandal-proof series), Figure 2- 3 (non vandal-proof series) and Figure 2- 4 (non vandal-proof series). Figure 2- 1 Dimension illustration 1 Figure 2- 2 Dimension illustration 2...

  • Page 12: Port Description

    Figure 2- 3 Dimension illustration 3 Figure 2- 4 Dimension illustration 4 2.2 Port Description The port is shown as in Figure 2- 5 and Figure 2- 6.
  • Page 13 Figure 2- 5 Port 1 Figure 2- 6 Port 2 Please refer to the following sheet for external connection port definition information. Port Port Name Connector Function Description Connect to AC 24V power. AC 24V power POWER Please note some series need port additional wiring.

  • Page 14: Listening

    Micro card Micro Connect to Micro SD card to realize Micro SD slot entry card local storage. Connect to fan to reduce device internal problem. Fan port Please note only some series support this function. Status indicator Display device status light Please refer to the following sheet for I/O port cable function information.

  • Page 15: Bidirectional Talk

    At the device end, speak via the pickup, and then you can get the audio from the earphone or sound box at the pc-end. 2.4 Bidirectional talk 2.4.1 Device-end to PC-end Device Connection Please connect the speaker to the audio input port of the device. Then connect the earphone to the audio output port of the PC.
  • Page 16 Figure 2- 7 Alarm Please refer to the following figure for alarm input information. See Figure 2- 8. Alarm input: When the input signal is idle or grounded, the device can collect the different statuses of the alarm input port. When the input signal is connected to the 3.3V or is idle, the device collects the logic “1”.

  • Page 18: Installation

    3 Installation Important  Before you complete the installation and setup, do not remove the electrostatic attraction film on the transparent enclosure. Otherwise it may result in injury.  After remove electrostatic attraction film, do not touch dome enclosure in case it may leave stain.
  • Page 19 Figure 3- 3 General installation 1 Step 1 Take the installation position diagram from the accessories bag and then paste it on the installation ceiling or the wall according to the monitor area. Please dig three bottom holes of the plastic expansion bolts according to the diagram.
  • Page 20 Step 3 Adjust the device chassis and pull the cable through the exit hole. Make fixture hole on chassis face the three plastic expansion bolts (in Step 1). Take 3 ST3.0 self-tapping screw out from the accessories bag and fix them on the three plastic expansion bolts to secure the chassis on installation surface. Note: ...

  • Page 21: Manual Zoom Lens Focus Operation

    Lock screw B/C Adjust lens tilt rotation angle. Lock screw D Adjust lend pan rotation angle. Lock Screw A Adjust lend pan rotation angle. Figure 3- 6 General installation 4 e) Please refer to Chapter 3.2.2 for the lens zoom and focus operation of the manual focus series product.

  • Page 22: Side Cable Exit

    Adjusting screw E Adjusting screw F Figure 3- 7 Manual zoom lens Step 1 Slightly loosen the adjusting screw E and push the adjust screw E to make it swing. Adjust the lens focus to the proper position according to the displayed video. Step 2 Slightly loosen the adjusting screw F and push the adjust screw F to make it swing.

  • Page 23: Micro Sd Card Installation

    ranges from 4.0~6.0 mm. It is very convenient for you to do the waterproof work when you pull the cable through your own exit. Please refer to the steps listed. Step 1 Take the waterproof airproof plug out, pull the cable (diameter ranges from 4.0 to 6.0 mm) through the waterproof airproof plug.
  • Page 24 Figure 3- 9 Micro SD card...

  • Page 25: Quick Configuration Tool

    4 Quick Configuration Tool 4.1 Overview Quick configuration tool can search current IP address, modify IP address. At the same time, you can use it to upgrade the device. Please note the tool only applies to the IP addresses in the same segment. 4.2 Operation Double click the “ConfigTools.exe”...
  • Page 26 In the configuration tool search interface (Figure 4-1), please select a device IP address and then double click it to open the login interface. Or you can select an IP address and then click the Login button to go to the login interface. See Figure 4-3. In Figure 4-3, you can view device IP address, user name, password and port.

  • Page 27: Web Operation

    5 Web Operation This series network camera products support the Web access and management via PC. Web includes several modules: Monitor channel preview, system configuration, alarm and etc. 5.1 Network Connection Please follow the steps listed below for network connection. Make sure the network camera has connected to the network properly.
  • Page 28 Figure 5- 2 Web login After you successfully logged in, please install WEB plug-in unit. Please refer to the Web Operation Manual included in the resource CD for detailed operation instruction. See Figure 5- 3. Figure 5- 3 Web monitoring window...

  • Page 29: Faq

    6 FAQ I cannot boot up Please click RESET button for at least five seconds to restore the device. factory default setup. Micro card Do not set the Micro SD card as the storage media to store the write times schedule record file.

  • Page 30: Appendix Toxic Or Hazardous Materials Or Elements

    Appendix Toxic or Hazardous Materials or Elements Toxic or Hazardous Materials or Elements Component Name Cr VI PBDE Circuit Board ○ ○ ○ ○ ○ ○ Component ○ ○ ○ ○ ○ ○ Device Case ○ ○ ○ ○ ○ ○...

Table of Contents