REPAIR
7.7 Lubrication System
Dipstick Tube
Removal and Installation
See Figure 7-72.
2
1
1. Remove nut (1).
2. Remove dipstick tube (2) and O-ring (3).
3. Inspect dipstick tube and O-ring. Replace as needed.
Installation Notes
Always use new O-rings, gaskets, and seals.
7
Install dipstick tube by reversing the order of removal.
7-30
3
Figure 7-72
Oil Pan
Removal
See Figure 7-73.
1
3
2
1
TN0713
1. Drain engine oil. (See "Change Engine Oil" on
page 3-2.)
2. Remove twelve cap screws (2), three nuts (1), and oil
pan (3).
3. Inspect oil pan. Replace as needed.
2
1
2
Figure 7-73
2
TN0741