Pcv Valve; Throttle Body; Intake Manifold - Suzuki K6A-YH6 Technical/Repair Manual

REPAIR

PCV Valve

Removal and Installation
See Figure 7-4.
1
1. Remove clamp (1) and hose (2).
2. Remove PCV valve (4) from grommet (3).
3. Inspect and test PCV valve. Replace as needed.
(See "PCV Valve/Hose Test" on page 5-2.)
Installation Note
Install PCV valve by reversing the order of removal.

Throttle Body

Removal and Installation
7
See Figures 7-5 and 7-6.
1
1. Remove cap screws (2) and throttle body (1).
7-4
2
3
4
Figure 7-4
2
Figure 7-5
3
2. Remove throttle body gasket (3).
Installation Notes
Always use new O-rings, gaskets, and seals.
TN0711
Install new gasket and throttle body by reversing the
order of removal.

Intake Manifold

Removal
See Figure 7-7.
1
4
1. Remove throttle body. (See "Throttle Body" on
page 7-4.)
2. Remove fuel rail and injectors. (See "Injectors" on
page 7-9.)
3. Remove knock sensor. (See "Knock Sensor" on
page 7-37.)
TN0737 4. Remove PCV hose. (See "PCV Valve" on page 7-4.)
5. Remove cap screw (4).
6. Remove nine cap screws (2) and three nuts (3).
7. Remove intake manifold (1).
Figure 7-6
3
2
2
3
Figure 7-7
TN0740
2
TN0736