Suzuki K6A-YH6 Technical/Repair Manual page 25

2. Using oil filter wrench, remove the oil filter (1).
2
Figure 3-4
3. Coat new oil filter O-ring (2) with clean engine oil.
NOTE
Prevent contamination; clean oil filter housing before
installing new oil filter.
4. Install new oil filter and tighten to specification.
Oil Filter Tightening Torque: 120 lb-in. (13.5 N•m)
5. Fill engine oil.
Oil Capacity with Filter: 3.1 qt (2.9 L)
Spark Plugs
Replacement
See Figures 3-5 through 3-7.
1
2
Figure 3-5
1. Remove cap screws (1).
2. Remove ignition coils (2).
3
TN0352
3. Remove spark plugs (3).
4
4. Set gap (5) on each new spark plug (4) to
specification.
Spark Plug Gap: 0.032—0.035 in. (0.8—0.9 mm)
5. Install new spark plugs, tighten to specification.
Spark Plug Tightening Torque: 177 lb-in. (20 N•m)
6. Install ignition coils.
TN0695
MAINTENANCE
Figure 3-6
5
Figure 3-7
3
TN0697
TN0698
3-3