Kodak Portrait User Manual page 8

Set up for the first time - Quickstart
STEP 1
Connect the power cables from the air filter blower to the connector on the
3D printer.
STEP 2
Affix the air filter blower cover over the air filter blower using the two screws
prepositioned in place.
STEP 3
Affix the two spool holder brackets using the screws prepositioned on the
back of the 3D printer.
STEP 4
Place the glass build surface over the heatbed using the magnets. The glass is
correctly positioned when it does not slide in any direction.
STEP 5
After verifying the print head is free to move and the build chamber is clear of
objects, plug the power cord into a power outlet and flip the power switch on
the back of the unit to turn on the 3D printer. Note that the platform will lower
fully and the print head will move.
STEP 6
Connect your printer to the Internet, using either an Ethernet cable or WiFi,
and sign up for a free KODAK 3D Cloud account on cloud.smart3d.tech to
gain access to a great deal of market-leading features using the KODAK 3D
Cloud.
Filament case instructions
8