Kodak Portrait User Manual page 11

•
KODAK specific profiles are pre-tested with recommended settings for
optimal printing with KODAK filaments;
•
The Cloud also works with gcodes from Cura, Simplify3D and other
popular slicers;
•
Keep statistics per user, per design and per printer;
•
Track filament used, printing data, logs and reasons for print failure to
better monitor usage over time.
Print surface
When printing with KODAK 3D Printing filaments using the KODAK
printing profiles, you will be able to print directly on the glass print
surface. For printing guidelines, go to support.smart3d.tech/printing-
guidelines.
A clean glass plate surface is crucial to achieve perfect adhesion. Clean
your glass print plate thoroughly after each print:
1.
Remove the glass build plate and clean it in lukewarm water using a
non-abrasive sponge.
2.
Use detergent and alcohol gel to remove adhesives or grease.
3.
Dry the glass using a clean microfiber cloth before putting it back in.
11