Safety Information - Kodak Portrait User Manual

SAFETY INFORMATION

Caution: Hot Surface.
The Hotends and the heatbed can reach temperatures above
100°C. To reduce the risk of injury from a hot component, allow the
surface to cool before touching it and always use tweezers to grab the hot
melted filament. The display top bar will show you the current temperatures
at all times.
Caution: Moving Parts that can cause injury.
Keep the printer door closed to retain the heat for best print results.
Keep hands, hair and loose clothing clear of all moving parts during
printing for safety.
This equipment is not suitable for use in locations where children are likely to
be present unsupervised.
Caution: Risk of Electric shock.
Connect the power cord to an appropriately rated and properly
grounded electrical outlet that is near the product and is easily
accessible.
Do not use this product with extension cords, multioutlet power strips,
multioutlet extenders, or UPS devices under 500W capacity.
Ensure that the correct AC plug type is used, according to your location. Do
not cut, twist, bind, crush, or place heavy objects on the power cord. Do not
subject the power cord to abrasion or stress. Do not pinch the power cord
between objects such as furniture and walls. If any of these things happen, a
risk of fire or electrical shock results. Inspect the power cord regularly for
signs of such problems. Remove the power cord from the electrical outlet
before inspecting it.
Do not place or use this product near water or wet locations. Use the printer
in a clean and dry environment, between 10°C (50ºF) and 30°C (95ºF), with
low humidity.
This product is designed, tested, and approved to meet strict global safety
standards with the use of specific manufacturer's components. The safety
features of some parts may not always be obvious. The manufacturer is not
responsible for the use of other replacement parts. Do not modify the
printer's design or parts.
Make sure that all external connections (such as Ethernet) are properly
installed in their marked plug-in ports.
ATTENTION: Inlet power switch uses 250V 6A fuses.
6