Kodak Portrait User Manual page 12

Printing Guidelines
You will find a table of suggested print settings for each type of filament at
support.smart3d.tech. We strongly recommend that you use the KODAK
printing profiles provided through the KODAK 3D Cloud or in the KODAK
3D Slicer application (available for download at support.smart3d.tech),
which have the best, tested settings.
Loading the filament
If you wish to load filament, go to the "Filaments" screen (Settings »
Filaments » Load), and follow the indications provided onscreen. Push the tip
of the filament slightly into the extruder and click "Continue". The extruder
should feed the filament towards the nozzle until it starts to come out of the
nozzle. Then press "Back".
Be sure to place the filament cases as in the picture:
12