Safety Instructions - WANHAO Duplicator 7 plus User Manual

A
before you get started, please read these important safety instructions.
CAUTION : the wanhao 3D printer includes moving parts that can cause injury. never reach
inside of the wanhao 3D printer while it is in operation, and allow time for the printer to cool
down after operation.
down after operation.
Do not leave the wanhao 3D printer unattended during operation
always wear the glove while handling resin or printing object.
Always take care when using the Scraper. Never direct the Scraper towards your fi ngers.
• The printer must not be exposed to water or rain, or damage will occur.
• The printer is designed to be used with ambient temperature ranging 15°C - 30°C, and humidity
ranging 20% - 50%. operating outside these limits may result in low quality models.
• In case of emergency, turn off the 3D printer at the power outlet.
• It is recommended that you use eye protection when cleaning/sanding printed models to avoid
small particles contacting eyes.
after sales support
8
86-571-23290996

safety Instructions

support@wanhao3dprinter.com support@wanhao3dprinter.com
MOVING PARTS MOVING PARTS
model : Duplicator 7 plus