WANHAO D9 Manual

How to connect printer to wifi by buildbee

How to connect your Wanhao D9 printer to wiﬁ

1. Sign in

> 2. Download Wiﬁ Setup > 3. Select Printer > 4. Additional Steps

Overview

Connecting your Wanaho D9 to wiﬁ is a matter of downloading

your wiﬁ setup into your BuildBee CloudDock.

You will need:

- BuildBee account

- BuildBee CloudDock

- USB stick *

* the support team has found that USB sticks with name brands

have better results.

Step 1. Sign Into BuildBee

Navigate to

button.

https:/ /buildbee.com

For help and support, contact support@me3d.com.au

and click the 'Sign In'

Table of Contents

Do you have a question about the D9 and is the answer not in the manual?

Page 1 1. Sign in > 2. Download Wiﬁ Setup > 3. Select Printer > 4. Additional Steps Overview Connecting your Wanaho D9 to wiﬁ is a matter of downloading your wiﬁ setup into your BuildBee CloudDock. You will need: - BuildBee account...
Page 2 How to connect your Wanhao D9 printer to wiﬁ 1. Sign in > 2. Download Wiﬁ Setup > 3. Select Printer > 4. Additional Steps Step 2. Download Wiﬁ Setup You will need a name-brand USB stick to complete this step.
Page 3 How to connect your Wanhao D9 printer to wiﬁ 1. Sign in > 2. Download Wiﬁ Setup > 3. Select printer > 4. Additional Steps Step 3. Specify your printer type Click on printers in the top bar, or directly visit https:/ /buildbee.com/printers...
Page 4 We recommend following the instructions for performing the AUTO LEVEL function. Z Oﬀset Calibration If this is the ﬁrst time you have used your Wanhao D9 you will need to calibrate the Z-Oﬀset for your printers nozzle. We recommend following the instructions provided by the manufacturer: https:/ /www.youtube.com/watch?v=O7sx8dHYxk8...