Belkin F5U122-PC User Manual page 15

P73631_F5U122-PC-man.qxd
Specifying TCP/IP Parameters
To access and change the networking properties
in Windows ® 2000
1 . Select "My Computer" / "Control Panel" / Network
and Dial-up Connections" .
2 . Select "Local Area Connection X" that corresponds to
the Belkin Ethernet Adapter. If you have more than one
network interface device, Windows labels them in
sequential order starting at 1. The Belkin Ethernet
Adapter should be the latest network device that was
installed and therefore the latest number.
3 . Select "Internet Protocol (TCP/IP)" and click
"Properties" .
4 . Select "Use the following IP address" .
Note: If you are connecting to an existing network,
please
information.
network, we
following:
Suggested IP Address = 194.168.0.X (where
"X" is
255).
Suggested Subnet Mask = 255.255.255.0
5 . Enter a valid IP Address and Subnet Mask and click
"OK" .
6 . Select "OK" to close the Local Area Connection
window and finish.
4/26/01 10:14 AM
(continued)
see your system administrator for this
If you are setting up a new
recommend the
greater than 0 and less than
1 4
Page 14