Belkin F5U122-PC User Manual page 12

P73631_F5U122-PC-man.qxd
Driver Installation
4 . A window will appear telling you that Windows has
detected new hardware. If this window does not
appear, contact your PC vendor for assistance.
5 . The "Found New Hardware Wizard" will appear.
Click "Next" .
6 . The "Found New Hardware Wizard" will tell you "The
wizard will complete installation for this device: USB
Ethernet Adapter" . Select "Search for a suitable driver
for my device (recommended)" and click "Next" .
7 . In the following window, place a checkmark next to
"Floppy Disk Drives" and uncheck all other selected
locations and click "OK" .
8 . The next window will indicate "The wizard found a
driver for the following device: USB Ethernet Adapter".
Click "Next" .
9 . Next a window will pop up that says "Digital Signature
Not Found". Click "Yes" .
10. The next window will tell you "Windows has
finished installing the software for this device". Click
"Finish" to complete the installation.
Once your computer has restarted, the Belkin USB 10/100
Ethernet Adapter will be active and working. If you are
connecting to a cable modem or xDSL modem, follow the
directions that came with your modem or from your
Internet provider.
If you are setting up a network, go to the section titled
4/26/01 10:14 AM Page 11
(continued)
1 1