Belkin F5U122-PC User Manual page 11

P73631_F5U122-PC-man.qxd
Driver Installation
5 . The "Add New Hardware Wizard" will appear telling you
"Windows has found the following hardware: USB
Ethernet Adapter" . Place a checkmark next to
"Automatic search for a better driver (recommended)"
and click "Next" .
6 . The system may prompt you to insert your Windows Me
CD. Insert the CD and select "OK" .
7 . The "Add New Hardware Wizard" will indicate, "Belkin
USB Ethernet Adapter" and "Windows has finished
installing the hardware device" . Click "Finish" .
8 . Windows will now prompt you to restart your
computer. Click "Yes" to complete the installation.
Once your computer has restarted, the Belkin USB 10/100
Ethernet Adapter will be active and working. If you are
connecting to a cable modem or xDSL modem, follow the
directions that came with your modem or from your
Internet provider.
If you are setting up a network, go to the section titled
"Specifying TCP/IP Parameters" to configure your adapter.
Windows ® 2000
1 . Close any Windows applications that you may be
running on your computer.
2 . Insert the Belkin USB 10/100 Ethernet Adapter floppy
disk into your floppy drive.
3 . Connect the USB cable to your computer and connect
the cable to the USB Ethernet Adapter.
4/26/01 10:14 AM Page 10
(continued)
1 0