Belkin F5U122-PC User Manual page 14

P73631_F5U122-PC-man.qxd
Specifying TCP/IP Parameters
To access and change the networking properties
in Windows ® M e
1 . Select "My Computer" / "Control Panel" . If you do not
see the "Network" icon in the window, click "view all
Control Panel options" (located on the right side of the
window).
2 . Select "Network" by double-clicking on the "Network"
i c o n .
3 . The Network Configuration window appears. In this
window, the USB Ethernet Adapter icon should be
v i s i b l e .
4 . To configure TCP/IP settings, select "TCP/IP -> Belkin
USB Ethernet Adapter" and click "Properties" . To
specify an IP address select "Specify an IP address" .
Note: If you are connecting to an existing network,
please
information.
network, we
following:
Suggested IP Address = 194.168.0.X (where
"X" is
255).
Suggested Subnet Mask = 255.255.255.0
5 . Enter a valid IP Address and Subnet Mask and click
"OK" .
6 . Select the "Identification" tab and verify/modify the
computer name and workgroup, and click "OK" .
4/26/01 10:14 AM
see your system administrator for this
If you are setting up a new
recommend the
greater than 0 and less than
1 3
Page 13
(continued)