Driver Installation - Belkin F5U122-PC User Manual

P73631_F5U122-PC-man.qxd

Driver Installation

Depending on which operating system you use, the
installation procedure will vary slightly. Please find the
installation section for your particular operating system for
the proper installation sequence.
Note: The drivers shipped with this product are
contained on a floppy disk. If your PC is not
equipped with a floppy disk drive, you may
download the drivers from the Belkin website at:
http://www.belkin.com.
Windows ® 98/Windows
1 . Close any Windows applications that may be running
on your computer.
2 . Insert the Belkin USB 10/100 Ethernet Adapter floppy
disk into your floppy drive.
3 . Connect the USB cable to your computer and connect
the cable to the USB Ethernet Adapter.
4 . A window will appear telling you that Windows has
detected new hardware. If this window does not
appear, contact your PC vendor for assistance.
5 . The "Add New Hardware Wizard" will appear on the
screen telling you that it has found the "USB Ethernet
Adapter" . Click "Next" .
6 . In the Window that appears next, place a checkmark
next to "Search for best driver for your device" and
click "Next" .
7 . In the next window, place a checkmark next to "Floppy
Disk" and uncheck all other selected locations and click
4/26/01 10:14 AM Page 8
® 98SE
8