Related Manuals for Belkin F5D4050
Summary of Contents for Belkin F5D4050
- Page 1 Powerline Adapters Connect a USB-equipped desktop, laptop or Ethernet-equipped device to a powerline network User Manual F5D4050 F5D4070...
-
Page 2: Table Of Contents
Introduction ........1 Overview Product Specifications . -
Page 3: Introduction
Thank you for purchasing the Belkin Powerline Adapter (the Adapter). Now you can take advantage of this great new technology and gain the freedom you need around the home or office using the existing power lines in your home or office. -
Page 4: Overview
F5D4070 • Powerline Ethernet Adapter • Ethernet Cable • Software CD • User Manual • Quick Installation Guide OVERVIEW USB 1.1 (F5D4050), Ethernet (F5D4070) HomePlug 1.0 100-140VAC 14Mbps More than 99 percent 56-bit DES, cipher block chaining Prioritized Random Access 5.0V, 500mA max... -
Page 5: Knowing Your Powerline Adapter
KNOWING YOUR POWERLINE ADAPTER Powerline Link Ethernet Link Powerline Activity Powerline Link F5D4050 Powerline Activity LED (Top) Blinking: Communicating with other devices on the network Off: Idle Powerline Link LED (Bottom) Solid: Connected to another powerline device on the network... -
Page 6: Installing The Powerline Ethernet Adapter
Software and Driver Installation 1. Insert the CD into your CD-ROM drive. 2. The Belkin Powerline ETHERNET Adapter Setup Utility screen will automatically appear. If it does not appear within 15–20 seconds, select your CD-ROM drive and double-click on the icon named “Setup.exe”. - Page 7 5. After completing the Wizard, you will be asked to restart your computer. Click “Yes” to restart your computer. 6. After rebooting, the Belkin Powerline Configuration Utility icon will be on your desktop. To open the Configuration Utility, double-click on this icon.
-
Page 8: Installing The Powerline Usb Adapter
INSTALLING THE POWERLINE USB ADAPTER Installing and Setting Up the Powerline USB Adapter - F5D4050 1. Install the software FIRST. Your Belkin Powerline USB Adapter will not work until you install the software. 2. Connect the Adapter directly into the wall outlet. - Page 9 3. The installer will start. Click “Next” to continue. 4. Follow the on-screen instruction until you see the message “To complete the installation of your Belkin F5D4050 powerline USB Adapter do the following.” Plug your powerline device directly into a wall outlet, and then plug your USB cable from the powerline device into your PC.
- Page 10 6. After completing the Wizard, you will be asked to restart your computer. Select “Yes” to restart your computer. 7. After rebooting, the Belkin Powerline Configuration Utility icon will be on your desktop. To open the Configuration Utility, double-click on this icon.
-
Page 11: Connecting To Your Network
CONNECTING TO YOUR NETWORK If you already have a powerline network in your home or office, the Adapter will automatically attempt to connect to your network. In most cases, the Adapter will connect to your network automatically. If you want to modify your powerline network encryption, you will need to set the Network Password settings of your Adapter. -
Page 12: Uninstalling The Software And Drivers
You can insert the software CD and click on the “Uninstall” option in the menu, or you can go to the Windows Control Panel and select the “Add/Remove Programs” option. The Belkin Wizard will walk you through the removal process. -
Page 13: Using The Powerline Configuration Utility
USING THE POWERLINE CONFIGURATION UTILITY When you launch the Belkin Powerline Configuration Utility (the Utility), you will be presented with the screen below. The Device Tab The “Device” tab shows you the Powerline Adapter that your computer is directly connected to. The Utility will automatically search and connect to your local Powerline Adapter when you open it. -
Page 14: The Network Tab
USING THE POWERLINE CONFIGURATION UTILITY The Network Tab The “Network” tab shows the MAC address and data rate of all remote powerline products on your network. This is a “snapshot” of the data rate at the time of the scan. Pressing the “Scan Powerline Network” (a) button may get a different result. - Page 15 The “Security” tab is used to set up the network password for the device that is connected directly to your computer. Note: All Belkin Powerline Adapters are shipped with a default network password of “HomePlug”. (a) Network Password Enter your network password settings in this area.
- Page 16 (a) Device ID Enter the device ID of the remote device on your network in this area. Every Belkin Powerline Adapter has a unique device ID printed on the device. The device ID is case-sensitive. Note that other third-party manufacturers might name it “device password”...
- Page 17 USING THE POWERLINE CONFIGURATION UTILITY (d) Set All Click “Set All” to apply your current network password to all devices that are listed in the “Remote Powerline Devices” list. (e) Remove Highlight a device ID and click “Remove” to remove it from the list.
-
Page 18: Troubleshooting
TROUBLESHOOTING You can find technical support information at networking.belkin.com or www.belkin.com through the tech support area. If you want to contact technical support by phone, please call 800-223-5546. Technical support is available 24 hours a day, 7 days a week. -
Page 19: Information
Belkin Corporation warrants this product against defects in materials and workmanship for its lifetime. If a defect is discovered, Belkin will, at its option, repair or replace the product at no charge provided it is returned during the warranty period, with transportation charges prepaid, to the authorized Belkin dealer from whom you purchased the product. -
Page 20: Electromagnetic Compatibility
FCC Statement DECLARATION OF CONFORMITY WITH FCC RULES FOR ELECTROMAGNETIC COMPATIBILITY We, Belkin Corporation, of 501 West Walnut Street, Compton, CA 90220, declare under our sole responsibility that the products, to which this declaration relates, Comply with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. - Page 21 Fax: +61 (0) 2 4372 8603 Belkin Tech Support US: 310.898.1100 ext. 2263 800.223.5546 ext. 2263 Europe: 00 800 223 55 460 Australia: 1800 666 040 P74248 © 2003 Belkin Corporation. All rights reserved. All trade names are registered trademarks of respective manufacturers listed.
Need help?
Do you have a question about the F5D4050 and is the answer not in the manual?
Questions and answers