❷ Projecting The Pictures On A Usb Memory (Basic Operation) - NEC ME342U User Manual

❷ Projecting the pictures on a USB memory (basic operation)
This section explains the basic operations of the VIEWER. This is the operating procedure when the option menu
(→ page 46) of the VIEWER is in the default state when shipped from the factory.
① Start the VIEWER
1. Turn on the projector.
2. Insert a USB memory into the USB-A port of the
projector.
NOTE:
To remove a USB memory from the projector, press the MENU
button in the file list screen or DRIVE LIST screen and select
[REMOVE USB DEVICE]. (→ Page 41 "Remove the USB memory")
3. Press the INPUT button.
The [INPUT] screen is displayed.
• Press the SOURCE button when using the remote
control.
4. Press the INPUT button a few times and move the
cursor to [USB-A].
• Every time the INPUT button is pressed briefly, the
cursor moves to the next input terminal.
• Move the cursor to [USB-A] and wait for a while for
the VIEWER to start and the DRIVE LIST screen on the
USB memory to be projected.
5. Check that the cursor is moved to [USB 1] and press
the ENTER button.
The file list screen will be displayed.
39
4. Using the VIEWER