NEC ME342U User Manual page 111

④ WIRELESS LAN
Configure the wireless LAN settings.
Item name
PROFILE
DISABLE
Disable the WIRELESS LAN of the projector.
INTELLIGENT CONNECTION
Compared to connecting with infrastructure or a simple access point, it is easier to connect to MultiPresenter that
has been installed in a computer or tablet terminal.
Item name
PROFILE
MODE
CHANNEL
SECURITY TYPE
SECURITY KEY
There are 4 wireless LAN profiles as shown below.
• DISABLE (initial value)
• INTELLIGENT CONNECTION
• SIMPLE ACCESS POINT
• INFRASTRUCTURE
If you are not using a wireless LAN, set the profile to [DISABLE].
The settings of the other 3 profiles are different from each other. This will be
explained later.
INTELLIGENT CONNECTION
Select the wireless mode (IEEE802.11b/g/n or IEEE802.11a/n).
• Initial value: IEEE802.11b/g/n
Set the wireless channel.
• Initial value: AUTO
Set the SECURITY TYPE (DISABLE or WPA2-PSK).
• Initial value: DISABLE
NOTE:
• When the PIN TYPE set in the MultiPresenter settings is ONE-TIME, the SECURITY TYPE cannot
be specified as it will be applied automatically.
Set the SECURITY KEY.
• Initial value: Blank
• A llowable characters: alphanumeric symbols (including space)
• Number of characters: 8–63 characters
When a SECURITY KEY is set, a number of asterisks "*" equivalent to the number
of characters is displayed.
NOTE:
• When the PIN TYPE set in the MultiPresenter settings is ONE-TIME, the SECURITY KEY cannot be
set as it will be set automatically.
Description
Description
100
7. Connecting to a Network